• Input Voltage: 110V or 220V AC
• Power Consumption: 85W
• Pump Type: Diaphragm pump
• Air Flow Rate: 0.3 - 6.5 L/min.
• Pump Power: 10 W
• Heating Element: 80 W Ceramic Heater
• Hot Air Temperature: 100 deg. C - 500 deg. C (212 deg F - 932 deg F)
• Temperatue Accurate: +/- 3 deg. C
• Quick Start Time: Less than 28 sec.
• 2 nozzles Included: inner diameter: 5 mm and 1.5 mm
• Soldering Iron Tips: Standard

The Hot Air Pencil is used with the SMDPREH preheater and the SMDHOLD PCB holder as a complete system rework station.

The Hot Air Pencil is a hot air rework station with smaller nozzles. It can be used to work with fine components and high density circuit boards.

The Hot Air Pencil is useful for cleaning SMD and BGA pads prior to resoldering the component.